|
Join our Newsletter and SAVE $$!
Our Customers are saying...
| |  | Flat Screen Televisions | Home » » » Sanus VMPL3-B Tilt Wall Mount for 27" to 84" Displays (Black) | | | | | | | Description: | | The VisionMount VMPL3 is a dual purpose tilting and low profile wall mount for medium to extra large LCD and plasma TVs. Sanus Systems’ Virtual Axis™ tilting system provides easy adjustment of viewing angle | | | Features: | |
• Durable powder-coated black finish
• Solid heavy-gauge steel construction
• Fits most 27 to 84 inches flat panel plasma and LCD TVs
• Supports up to 280 pounds
• Easy to install
| | | Product Details: | | | Product Length:
| 0.0 inches | | Product Width:
| 0.0 inches | | Product Height:
| 0.0 inches | | Product Weight:
| 28.55 pounds | | Package Length:
| 29.5 inches | | Package Width:
| 10.8 inches | | Package Height:
| 7.1 inches | | Package Weight:
| 28.6 pounds | | Average Customer Rating:
|  based on 122 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 122 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
54 of 56 found the following review helpful:
 best mount for a large screen tvMay 20, 2007
By johnny di
"john"
I recently purchased the brand new panasonic th-58pz700u, this is a large tv that weighs 140lbs, so after doing much research I found this sanus mount to be the best one for this large tv, the hardware that comes with the mount is excellent, you do not have to run to the hardware store for extra nuts/washers bolts etc... everything you could possibly need comes with the mount. the best part about this unit is that you can install onto 3 studs instead of the more conventional 2 stud installation, this makes it much more secure. I was very lucky in that my house was built back in 1955 and back then they used studs spaced at 12 inches apart instead of the current 16 inch apart requirement, this enabled me to actually use 4 studs for the install, needless to say this tv will never fall off the wall. basically when your going to install this mount read all the instructions thoroughly first and then use masking tape to "draw" on the wall exactly where you want the tv, then figure out where the mount will go in relation to the tv's mounting holes, then just find the studs and install the mount, I am very happy with this mount and tv looks great, enjoy
25 of 25 found the following review helpful:
Mount for 65" Plasma Panasonic TC-P65S1- No Adpt NeededDec 12, 2009
By The Ruxpen
Ok, after reading reviews on how this mount would not work with some panasonic sets (as well as some others), i was not sure if i needed to by the extended adapter. Just to avoid the installers leaving should this not work i bought the adapter.
results: you DONT need the adapter/extender for this TV. everything you need is in the box.
my TV details:
65" Plasma Panasonic TC-P65S1
24 of 25 found the following review helpful:
Sanus TV wall mount - impressive in this day and age ...Jan 20, 2007
By Jerry Cipriano
In this day and age of mediocre design, shoddy quality control, unreadable instructions, I was quite impressed with this wall mount. It's only a wall mount and, as such, is not the focus of attention. However, it is the slimmest, lowest profile wall mount I've seen. There were multiple options for stud wall mount and concrete block wall mount, and there were well thought out hardware options included. Frequently when I buy a product such as this, I have to run down to the hardware store to get additional nuts and bolts because I'm finicky about the installation. In this case, There was enough hardware and nuts and bolts left over for me to open a hardware store. After I talked to a structural engineer (I didn't hire one of course, but I'm in a related profession) about mounting over a fireplace, I found the enclosed procedure and hardware from Sanus were even better than the engineer proposed.
I had a 50" plasma to mount. This bracket had enough hole spacing options to mate to this and a thousand other TVs. It had optional brackets, which I didn't use, that could have extended it to what seems like a 100" TV, although don't sue me if I exaggerated.
I also liked the fact that it was made in the USA. The only nit to pick was that the company took about 3 weeks over the Christmas holidays to get it to me.
14 of 14 found the following review helpful:
Works with the Philips 42PF7320AFeb 09, 2006
By J. Marotta
I bought this item to mount my Philips 42PF7320A 42" Plasma which requires a wider mount than standard universal mount. It went up really easy and I was able to put my plasma on it no problem. The price here is $110 cheaper than Best Buy. This was a great deal for this item.
11 of 11 found the following review helpful:
Sanus WallmountJan 27, 2008
By Don R
I purchased this wall mount to accomodate my new Pioneer 60" plasma which weighs approximately 125 lbs.
It was very easy to assemble and the hardware mounted to the back of the TV perfectly.
I was concerned about the product's width size because the description was not specific in that regard. However that concern was put to rest following completed assembly. I don't know how wide it can expand to but I was able to utilize 3 wall studs spaced the standard 16" apart. There is no way that TV is coming off that wall unless I personally remove it.
Once mounted on the wall, you and your partner simply lift the tv and slide the hooks you attached to the back of it into the wall bracket. Thats all there is to it! The mount itself allows you to tilt the tv up to 11 degrees to accomodate your seating angle plus you have the ability to slide the tv left or right for perfect centering.
For ease of assembly, mounting and solid steel durability, this is the wall mount you must buy!
See all 122 customer reviews on Amazon.com
| | |
|
